Skip to main content

· One min read

Question​

How do I view the number of active or queued mutations?

Answer​

Monitoring the number of active or queued mutations is important if you are performing a lot of ALTER or UPDATE statements on your tables. These queries rewrite data parts and are not atomic - they are ordered by their creation part and applied to each part in that order. You can find more details on mutations in the docs.

Each mutation generates an entry in the system.mutations table. When performing a large number of mutations, you can monitor the count running and queued mutations with this:

SELECT
   hostname() AS host,
   count()
   FROM clusterAllReplicas('default', 'system.mutations') WHERE not is_done
   GROUP BY host;
Note

This query assumes you are running a cluster named default, which is the name of your cluster in ClickHouse Cloud. Replace default with the name of your cluster.

If you do not have a cluster, use this command:

SELECT
   hostname() AS host,
   count()
   FROM system.mutations WHERE not is_done
   GROUP BY host;

We also recommend reading this recent blog on updates and deletes.

· 2 min read

ClickHouse Keeper provides the coordination system for data replication and distributed DDL queries execution. ClickHouse Keeper is compatible with ZooKeeper, but it might not be obvious why you should use ClickHouse Keeper instead of ZooKeeper. This article discusses some of the benefits of Keeper.

Answer​

ClickHouse Cloud uses clickhouse-keeper at large scale for thousands of services in a multi-tenant environment. We designed and built Keeper so that we could remove our dependency on the Java-based ZooKeeper implementation. ClickHouse Keeper solves many well-known drawbacks of ZooKeeper and makes additional improvements, including:

  • Snapshots and logs consume much less disk space due to better compression
  • No limit on the default packet and node data size (it is 1 MB in ZooKeeper)
  • No zxid overflow issue (it forces a restart for every 2B transactions in ZooKeeper)
  • Faster recovery after network partitions due to the use of a better distributed consensus protocol
  • It uses less memory for the same volume of data
  • It is easier to setup, and it does not require specifying the JVM heap size or a custom garbage collection implementation
  • A few custom commands in the protocol enable faster operations in ReplicatedMergeTree tables
  • A larger coverage by Jepsen tests

In addition, ClickHouse Support has observed a massive decrease in cluster problems in cases with sites who use clickhouse-keeper rather than ZooKeeper.

Check out the Keeper docs page for more details on how to configure and run ClickHouse Keeper.

· 2 min read

If a column is sparse (empty or contains mostly zeros), ClickHouse can encode it in a sparse format and automatically optimize calculations - the data does not require full decompression during queries. In fact, if you know how sparse a column is, you can define its ratio using the ratio_of_defaults_for_sparse_serialization setting to optimize serialization.

This handy query can take a while, but it analyzes every row in your table and determines the ratio of values that are zero (or the default) in every column in the specified table:

SELECT *
    APPLY x -> (x = defaultValueOfArgumentType(x)) APPLY avg APPLY x -> round(x, 3)
FROM table_name
FORMAT Vertical

For example, we ran this query above on the environmental sensors dataset table named sensors which has over 20B rows and 19 columns:

SELECT *
    APPLY x -> (x = defaultValueOfArgumentType(x)) APPLY avg APPLY x -> round(x, 3)
FROM sensors
FORMAT Vertical

Here is response:


Row 1:
──────
round(avg(equals(sensor_id, defaultValueOfArgumentType(sensor_id))), 3):                 0
round(avg(equals(sensor_type, defaultValueOfArgumentType(sensor_type))), 3):             0.159
round(avg(equals(location, defaultValueOfArgumentType(location))), 3):                   0
round(avg(equals(lat, defaultValueOfArgumentType(lat))), 3):                             0.001
round(avg(equals(lon, defaultValueOfArgumentType(lon))), 3):                             0.001
round(avg(equals(timestamp, defaultValueOfArgumentType(timestamp))), 3):                 0
round(avg(equals(P1, defaultValueOfArgumentType(P1))), 3):                               0.474
round(avg(equals(P2, defaultValueOfArgumentType(P2))), 3):                               0.475
round(avg(equals(P0, defaultValueOfArgumentType(P0))), 3):                               0.995
round(avg(equals(durP1, defaultValueOfArgumentType(durP1))), 3):                         0.999
round(avg(equals(ratioP1, defaultValueOfArgumentType(ratioP1))), 3):                     0.999
round(avg(equals(durP2, defaultValueOfArgumentType(durP2))), 3):                         1
round(avg(equals(ratioP2, defaultValueOfArgumentType(ratioP2))), 3):                     1
round(avg(equals(pressure, defaultValueOfArgumentType(pressure))), 3):                   0.83
round(avg(equals(altitude, defaultValueOfArgumentType(altitude))), 3):                   1
round(avg(equals(pressure_sealevel, defaultValueOfArgumentType(pressure_sealevel))), 3): 1
round(avg(equals(temperature, defaultValueOfArgumentType(temperature))), 3):             0.532
round(avg(equals(humidity, defaultValueOfArgumentType(humidity))), 3):                   0.544

1 row in set. Elapsed: 992.041 sec. Processed 20.69 billion rows, 1.39 TB (20.86 million rows/s., 1.40 GB/s.)

From the results above:

  • the sensor_id columns is not sparse at all. In fact, every row has a non-zero value
  • the sensor_type is only sparse about 15.9% of the time
  • the P0 column is very sparse: 99.9% of the values are zero
  • the pressure column is quite sparse at 83%
  • and temperature column has 53.2% of its values missing or zero

Like we said, it's a handy query for computing how sparse your columns are in a ClickHouse table!

· 2 min read

Question​

How can I validate that two queries return the same resultsets?

Answer​

You can use the below approach:

WITH
    (
        SELECT sum(cityHash64(*))
        FROM
        (
            -- your query 1 here
            -- SELECT ...
        )
    ) AS q1_resultset_hash,
    (
        SELECT sum(cityHash64(*))
        FROM
        (
            -- your query 2 here
            -- SELECT ...
        )
    ) AS q2_resultset_hash
SELECT equals(q1_resultset_hash,q2_resultset_hash) as Q1_equals_Q2

The example uses a CTE to calculate sums of the cityHash value of each row in these two queries and will return 1 if the two resultsets are identical.

Using some integers sequence data and some pretty formatting:

WITH
    (
        SELECT sum(cityHash64(*))
        FROM
        (
            SELECT *
            FROM numbers(10)
            ORDER BY number DESC
        )
    ) AS q1_resultset_hash,
    (
        SELECT sum(cityHash64(*))
        FROM
        (
            SELECT *
            FROM numbers(10)
            ORDER BY number ASC
        )
    ) AS q2_resultset_hash
SELECT q1_resultset_hash = q2_resultset_hash AS Q1_equals_Q2
FORMAT Pretty

will return:

┏━━━━━━━━━━━━━━┓
┃ Q1_equals_Q2 ┃
┡━━━━━━━━━━━━━━┩
│            1 │
└──────────────┘

While this can be handy in many scenarios, it can't be considered as a silver bullet to validate equality of resultsets for all types and there are caveats to using it, for example if any row contains NULL values the above approach will fail.

· One min read

Cause of the Error​

This error occurs while trying to connect to a ClickHouse server using clickhouse-client. The cause of the error is either:

  • the client configuration file config.xml is missing the root certificate in the machine CA default store, or
  • there is a self-signed or internal CA certificate that is not configured

Solution​

If using an internal or self-signed CA, configure the CA root certificate in config.xml in the client directory (e.g. /etc/clickhouse-client) and disable the loading of the default root CA certificates from the default location.

Here is an example configuration:

<openSSL>
    <client>
        <loadDefaultCAFile>false</loadDefaultCAFile>
        <caConfig>/etc/clickhouse-server/certs/marsnet_ca.crt</caConfig>
        <cacheSessions>true</cacheSessions>
        <disableProtocols>sslv2,sslv3</disableProtocols>
        <preferServerCiphers>true</preferServerCiphers>
        <invalidCertificateHandler>
            <name>RejectCertificateHandler</name>
        </invalidCertificateHandler>
    </client>
</openSSL>

Additional resources​

View https://clickhouse.com/docs/en/interfaces/cli/#configuration_files

· 2 min read

When this error occurs, a table shows as readonly and the error states intersecting parts. You can see the error in the logs or by

SELECT *
FROM system.replicas
WHERE is_readonly = 1

The error message looks like:

Code: 49. DB::Exception: Part XXXXX intersects previous part YYYYY. It is a bug or a result of manual intervention in the ZooKeeper data. (LOGICAL_ERROR) (version 21.12.4.1 (official build))

Cause of the Error​

This error can be caused by a race condition between mergeSelectingTask and queue reinitialization.

Solution​

Execute the following queries on all replicas:

DETACH TABLE table_name;  -- Required for DROP REPLICA

SYSTEM DROP REPLICA 'replica_name' FROM ZK PATH '/table_path_in_zk/'; -- It will remove everything from /table_path_in_zk

ATTACH TABLE table_name;  -- Table will be in readonly mode, because there is no metadata in ZK

Then execute the following on all replicas:

SYSTEM RESTORE REPLICA table_name;  -- It will detach all partitions, re-create metadata in ZK (like it's new empty table), and then attach all partitions back

SYSTEM SYNC REPLICA table_name; -- Wait for replicas to synchronize parts. Also it's recommended to check `system.detached_parts` on all replicas after recovery is finished.
Tip

You should upgrade to the latest version of ClickHouse

Additional resources​

Related PRs and GitHub issues:

Versions affected:​

ClickHouse v 22.12 and prior

· 3 min read

TTL is going to be eventually applied. What does that mean? The MergeTree table setting merge_with_ttl_timeout sets the minimum delay in seconds before repeating a merge with delete TTL. The default value is 14400 seconds (4 hours). But that is just the minimum delay, it can take longer until a merge for delete TTL is triggered.

You can view all of your current TTL settings (like merge_with_ttl_timeout) with this query:

SELECT *
FROM system.merge_tree_settings
WHERE name like '%ttl%'

The response looks like:

┌─name───────────────────────────────────────────────────────────┬─value───┬─changed─┬─description────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┬─min──┬─max──┬─readonly─┬─type───┐
│ max_replicated_merges_with_ttl_in_queue                        │ 1       │       0 │ How many tasks of merging parts with TTL are allowed simultaneously in ReplicatedMergeTree queue.                                                                                          │ ᴺᵁᴸᴸ │ ᴺᵁᴸᴸ │        0 │ UInt64 │
│ max_number_of_merges_with_ttl_in_pool                          │ 2       │       0 │ When there is more than specified number of merges with TTL entries in pool, do not assign new merge with TTL. This is to leave free threads for regular merges and avoid "Too many parts" │ ᴺᵁᴸᴸ │ ᴺᵁᴸᴸ │        0 │ UInt64 │
│ merge_tree_clear_old_broken_detached_parts_ttl_timeout_seconds │ 2592000 │       1 │ Remove old broken detached parts in the background if they remained intouched for a specified by this setting period of time.                                                              │ ᴺᵁᴸᴸ │ ᴺᵁᴸᴸ │        0 │ UInt64 │
│ merge_with_ttl_timeout                                         │ 14400   │       0 │ Minimal time in seconds, when merge with delete TTL can be repeated.                                                                                                                       │ ᴺᵁᴸᴸ │ ᴺᵁᴸᴸ │        0 │ Int64  │
│ merge_with_recompression_ttl_timeout                           │ 14400   │       0 │ Minimal time in seconds, when merge with recompression TTL can be repeated.                                                                                                                │ ᴺᵁᴸᴸ │ ᴺᵁᴸᴸ │        0 │ Int64  │
│ ttl_only_drop_parts                                            │ 0       │       0 │ Only drop altogether the expired parts and not partially prune them.                                                                                                                       │ ᴺᵁᴸᴸ │ ᴺᵁᴸᴸ │        0 │ Bool   │
│ materialize_ttl_recalculate_only                               │ 0       │       0 │ Only recalculate ttl info when MATERIALIZE TTL                                                                                                                                             │ ᴺᵁᴸᴸ │ ᴺᵁᴸᴸ │        0 │ Bool   │
└────────────────────────────────────────────────────────────────┴─────────┴─────────┴────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┴──────┴──────┴──────────┴────────┘

You can use SHOW CREATE TABLE to check if your table contains TTL rules, as well as if any of the table SETTINGS modified the values of the settings above:

SHOW CREATE TABLE <TableName>

Force a TTL rule to be applied​

This is not the most elegant solution, but you can explicitly call MATERIALIZE TTL, which forces all the TTL rules of a table to be materialized:

ALTER TABLE my_table
    MATERIALIZE TTL

Background threads affecting TTL​

It is possible that your TTL rules are not being applied because there are not enough working threads in the background pool. For example, if you insert data intensively, then the whole background pool might be utilized for normal merges. However, you can increase the background pool size.

You can check your current background pool size with this query:

SELECT *
FROM system.settings
WHERE name = 'background_pool_size';

The response looks like:

┌─name─────────────────┬─value─┬─changed─┬─description─────────────────────┬─min──┬─max──┬─readonly─┬─type───┬─default─┬─alias_for─┐
│ background_pool_size │ 16    │       0 │ Obsolete setting, does nothing. │ ᴺᵁᴸᴸ │ ᴺᵁᴸᴸ │        0 │ UInt64 │ 16      │           │
└──────────────────────┴───────┴─────────┴─────────────────────────────────┴──────┴──────┴──────────┴────────┴─────────┴───────────┘

Check the docs for how to modify the background_pool_size setting, which is configured as:

<background_pool_size>16</background_pool_size>

You can check the current background pool activity with this query:

SELECT *
FROM system.metrics
WHERE metric like 'Background%'

· 3 min read

How to install and test ClickHouse on Microsoft Windows

When ClickHouse installing on Windows 10 you may receive errors when inserting data, for example:

DB::Exception: std::__1::__fs::filesystem::filesystem_error: filesystem error: in rename: Permission denied ["./store/711/71144174-d098-4056-8976-6ad1204205ec/tmp_insert_all_1_1_0/"] ["./store/711/71144174-d098-4056-8976-6ad1204205ec/all_1_1_0/"]. Stack trace:

On Windows 10, WSL needs to be upgraded to WSL 2.

wsl
  • For testing follow these instructions, you should have similar output: Since this is for testing, I logged in as root to avoid permissions issues:
sudo -i
  • Create a ClickHouse directory:
root@marspc2:~# mkdir /clickhouse
  • From the new directory, download clickhouse:
root@marspc2:/# cd clickhouse

root@marspc2:/clickhouse# curl https://clickhouse.com | sh
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  2739    0  2739    0     0   5515      0 --:--:-- --:--:-- --:--:--  5511

Will download https://builds.clickhouse.com/master/amd64/clickhouse into clickhouse

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  530M  100  530M    0     0  8859k      0  0:01:01  0:01:01 --:--:-- 8549k

Successfully downloaded the ClickHouse binary, you can run it as:
    ./clickhouse

You can also install it:
    sudo ./clickhouse install
  • Start the clickhouse server:
root@marspc2:/clickhouse# ./clickhouse server
Processing configuration file 'config.xml'.
There is no file 'config.xml', will use embedded config.
Cannot set max size of core file to 1073741824
2023.04.17 19:19:23.155323 [ 500 ] {} <Information> SentryWriter: Sending crash reports is disabled
2023.04.17 19:19:23.165447 [ 500 ] {} <Trace> Pipe: Pipe capacity is 1.00 MiB
2023.04.17 19:19:23.271147 [ 500 ] {} <Information> Application: Starting ClickHouse 23.4.1.1222 (revision: 54473, git hash: 3993aef8e281815ac4269d44e27bb1dcdcff21cb, build id: AF16AA59B689841860F39ACDBED30AC8F9AB70FA), PID 500
2023.04.17 19:19:23.271208 [ 500 ] {} <Information> Application: starting up
2023.04.17 19:19:23.271237 [ 500 ] {} <Information> Application: OS name: Linux, version: 5.15.90.1-microsoft-standard-WSL2, architecture: x86_64
...
  • In another WSL window, start the client:
root@marspc2:/clickhouse# ./clickhouse client
ClickHouse client version 23.4.1.1222 (official build).
Connecting to localhost:9000 as user default.
Connected to ClickHouse server version 23.4.1 revision 54462.

Warnings:
 * Linux transparent hugepages are set to "always". Check /sys/kernel/mm/transparent_hugepage/enabled

marspc2. :)
  • Create the database and table:
marspc2. :) create database db1;

CREATE DATABASE db1

Query id: 688f79e2-8132-44ed-98d6-0581abe9903a

Ok.

0 rows in set. Elapsed: 0.007 sec.

marspc2. :) create table db1.table1 (id Int64, string_column String) engine = MergeTree() order by id;

CREATE TABLE db1.table1
(
    `id` Int64,
    `string_column` String
)
ENGINE = MergeTree
ORDER BY id

Query id: d91a93b4-e13f-4e17-8201-f329223287d0

Ok.

0 rows in set. Elapsed: 0.010 sec.
  • Insert sample rows:
marspc2. :) insert into db1.table1 (id, string_column) values (1, 'a'), (2,'b');

INSERT INTO db1.table1 (id, string_column) FORMAT Values

Query id: 2b274eef-09af-434b-88e0-c25799649910

Ok.

2 rows in set. Elapsed: 0.003 sec.
  • View the rows:
marspc2. :) select * from db1.table1;

SELECT *
FROM db1.table1

Query id: 74c76bf1-d944-4b21-a384-cc0b5e6aa579

┌─id─┬─string_column─┐
│  1 │ a             │
│  2 │ b             │
└────┴───────────────┘

2 rows in set. Elapsed: 0.002 sec.

· 6 min read

The query_log table in the system database keeps track of all your queries, including:

  • how much memory the query consumed, and
  • how much CPU time was needed

The following query returns the top 10 queries, where "top" means the queries that used the most memory:

SELECT
    type,
    event_time,
    initial_query_id,
    query_id,
    formatReadableSize(memory_usage) AS memory,
    ProfileEvents.Values[indexOf(ProfileEvents.Names, 'UserTimeMicroseconds')] AS userCPU,
    ProfileEvents.Values[indexOf(ProfileEvents.Names, 'SystemTimeMicroseconds')] AS systemCPU,
    normalizedQueryHash(query) AS normalized_query_hash
FROM clusterAllReplicas(default, system.query_log)
ORDER BY memory_usage DESC
LIMIT 10;

The response looks like:

┌─type────────┬──────────event_time─┬─initial_query_id─────────────────────┬─memory─────┬─────userCPU─┬──systemCPU─┬─normalized_query_hash─┐
│ QueryFinish │ 2023-03-26 21:36:07 │ 7fc488a5-838f-410d-88ee-2f492825a26b │ 3.45 GiB   │ 28147128901 │ 8590897697 │    178963678599600243 │
│ QueryFinish │ 2023-03-26 21:36:04 │ 7fc488a5-838f-410d-88ee-2f492825a26b │ 1.18 GiB   │ 10194162387 │ 1183376457 │   4121209451971717712 │
│ QueryFinish │ 2023-03-26 21:36:06 │ 7fc488a5-838f-410d-88ee-2f492825a26b │ 1.16 GiB   │ 10516510952 │ 1484303318 │   4121209451971717712 │
│ QueryFinish │ 2023-03-26 21:35:59 │ 7fc488a5-838f-410d-88ee-2f492825a26b │ 1.14 GiB   │ 11484580963 │ 1464145099 │   4121209451971717712 │
│ QueryFinish │ 2023-03-26 21:47:01 │ 8119e682-a343-4847-96e7-d34ad8a748a1 │ 455.29 MiB │   123340498 │    8234304 │  10687606311941357470 │
│ QueryFinish │ 2023-03-26 22:07:05 │ f2690e48-fe1e-4367-ae9d-435d962003a5 │ 377.94 MiB │  2358130001 │  668098391 │   5988812223780974416 │
│ QueryFinish │ 2023-03-26 20:45:42 │ 04618222-40a1-4299-8c3d-9f050a82d849 │ 18.48 MiB  │       24676 │      16620 │   3205198713665290475 │
│ QueryFinish │ 2023-03-26 22:14:37 │ badf1097-5f8f-4486-88e9-3a5ac2e4734c │ 17.41 MiB  │      186234 │     148739 │   1910846996890686559 │
│ QueryFinish │ 2023-03-26 21:39:42 │ 8d373327-f566-4cd5-9f2c-cec75f534751 │ 16.19 MiB  │       23169 │      12365 │   3205198713665290475 │
│ QueryFinish │ 2023-03-26 21:35:42 │ ea672dba-7c10-4dd4-b819-cad9dccbf5d0 │ 13.97 MiB  │       20696 │       8001 │   3205198713665290475 │
└─────────────┴─────────────────────┴──────────────────────────────────────┴────────────┴─────────────┴────────────┴───────────────────────┘
Note

The initial_query_id represents the ID of the initial query for distributed query execution launched from the node receiving the request. The query_id contains the ID of the child query executed on a different node. See this article for more details.

You can use the query ID to extract more details about the query. Let's research our longest running query above (the first one):

SELECT query
FROM clusterAllReplicas(default, system.query_log)
WHERE initial_query_id = '7fc488a5-838f-410d-88ee-2f492825a26b'

It turns out to be the query we used to insert a few billion rows of data into a table named youtube (see the YouTube dislikes dataset):

INSERT INTO youtube
SETTINGS input_format_null_as_default = 1
SELECT
    id,
    parseDateTimeBestEffortUS(toString(fetch_date)) AS fetch_date,
    upload_date,
    ifNull(title, '') AS title,
    uploader_id,
    ifNull(uploader, '') AS uploader,
    uploader_sub_count,
    is_age_limit,
    view_count,
    like_count,
    dislike_count,
    is_crawlable,
    has_subtitles,
    is_ads_enabled,
    is_comments_enabled,
    ifNull(description, '') AS description,
    rich_metadata,
    super_titles,
    ifNull(uploader_badges, '') AS uploader_badges,
    ifNull(video_badges, '') AS video_badges
FROM s3Cluster('default','https://clickhouse-public-datasets.s3.amazonaws.com/youtube/original/files/*.zst', 'JSONLines')

initial_query_id VS query_id​

Note that in a clustered ClickHouse environment (like ClickHouse Cloud) initial_query_id represents the ID of the initial query for distributed query execution launched from the node receiving the request; then query_id field will contain the ID of the child query executed on a different node.

If we add query_id to the above query we pin our search around initial_query_id = a7262fa2-bd8b-4b51-a359-621ccf282417 and hostname():

SELECT
    hostname(),
    type,
    event_time,
    initial_query_id,
    query_id,
    formatReadableSize(memory_usage) AS memory,
    ProfileEvents.Values[indexOf(ProfileEvents.Names, 'UserTimeMicroseconds')] AS userCPU,
    ProfileEvents.Values[indexOf(ProfileEvents.Names, 'SystemTimeMicroseconds')] AS systemCPU,
    normalizedQueryHash(query) AS normalized_query_hash
FROM clusterAllReplicas(default, system.query_log)
WHERE initial_query_id = 'a7262fa2-bd8b-4b51-a359-621ccf282417'
ORDER BY memory_usage DESC
LIMIT 10 FORMAT Pretty;

we will get:

┏━━━━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━┳━━━━━━━━━┳━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━┓
┃ hostname()             ┃ type        ┃          event_time ┃ initial_query_id                     ┃ query_id                             ┃ memory     ┃ userCPU ┃ systemCPU ┃ normalized_query_hash ┃
┡━━━━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━╇━━━━━━━━━╇━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━━━┩
│ server-0 │ QueryFinish │ 2023-04-26 06:25:53 │ a7262fa2-bd8b-4b51-a359-621ccf282417 │ 1f810b3c-b3cb-4a7b-bc6c-8c8cc1e52515 │ 125.13 MiB │ 1754290 │    133344 │  17604798521132779336 │
├────────────────────────┼─────────────┼─────────────────────┼──────────────────────────────────────┼──────────────────────────────────────┼────────────┼─────────┼───────────┼───────────────────────┤
│ server-2 │ QueryFinish │ 2023-04-26 06:25:53 │ a7262fa2-bd8b-4b51-a359-621ccf282417 │ a7262fa2-bd8b-4b51-a359-621ccf282417 │ 123.08 MiB │ 1849115 │    123412 │   4258439895846105173 │
└────────────────────────┴─────────────┴─────────────────────┴──────────────────────────────────────┴──────────────────────────────────────┴────────────┴─────────┴───────────┴───────────────────────┘
┏━━━━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━┳━━━━━━━━━┳━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━┓
┃ hostname()             ┃ type        ┃          event_time ┃ initial_query_id                     ┃ query_id                             ┃ memory    ┃ userCPU ┃ systemCPU ┃ normalized_query_hash ┃
┡━━━━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━╇━━━━━━━━━╇━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━━━┩
│ server-1 │ QueryFinish │ 2023-04-26 06:25:53 │ a7262fa2-bd8b-4b51-a359-621ccf282417 │ 7dfd9297-5173-4be7-a866-d7cbe1e1abab │ 93.77 MiB │ 1890981 │    101724 │  17604798521132779336 │
├────────────────────────┼─────────────┼─────────────────────┼──────────────────────────────────────┼──────────────────────────────────────┼───────────┼─────────┼───────────┼───────────────────────┤
│ server-1 │ QueryStart  │ 2023-04-26 06:25:52 │ a7262fa2-bd8b-4b51-a359-621ccf282417 │ 7dfd9297-5173-4be7-a866-d7cbe1e1abab │ 0.00 B    │       0 │         0 │  17604798521132779336 │
└────────────────────────┴─────────────┴─────────────────────┴──────────────────────────────────────┴──────────────────────────────────────┴───────────┴─────────┴───────────┴───────────────────────┘
┏━━━━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━┳━━━━━━━━━┳━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━┓
┃ hostname()             ┃ type       ┃          event_time ┃ initial_query_id                     ┃ query_id                             ┃ memory ┃ userCPU ┃ systemCPU ┃ normalized_query_hash ┃
┡━━━━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━╇━━━━━━━━━╇━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━━━┩
│ server-0 │ QueryStart │ 2023-04-26 06:25:52 │ a7262fa2-bd8b-4b51-a359-621ccf282417 │ 1f810b3c-b3cb-4a7b-bc6c-8c8cc1e52515 │ 0.00 B │       0 │         0 │  17604798521132779336 │
├────────────────────────┼────────────┼─────────────────────┼──────────────────────────────────────┼──────────────────────────────────────┼────────┼─────────┼───────────┼───────────────────────┤
│ server-2 │ QueryStart │ 2023-04-26 06:25:52 │ a7262fa2-bd8b-4b51-a359-621ccf282417 │ a7262fa2-bd8b-4b51-a359-621ccf282417 │ 0.00 B │       0 │         0 │   4258439895846105173 │
└────────────────────────┴────────────┴─────────────────────┴──────────────────────────────────────┴──────────────────────────────────────┴────────┴─────────┴───────────┴───────────────────────┘

Note we have several results from several hosts (the different cluster nodes).

To refine further and get only the child queries we could also add the query_id != initial_query_id condition to the WHERE clause:

SELECT
    hostname(),
    type,
    event_time,
    initial_query_id,
    query_id,
    formatReadableSize(memory_usage) AS memory,
    ProfileEvents.Values[indexOf(ProfileEvents.Names, 'UserTimeMicroseconds')] AS userCPU,
    ProfileEvents.Values[indexOf(ProfileEvents.Names, 'SystemTimeMicroseconds')] AS systemCPU,
    normalizedQueryHash(query) AS normalized_query_hash
FROM clusterAllReplicas(default, system.query_log)
WHERE (query_id = initial_query_id) AND (initial_query_id = 'a7262fa2-bd8b-4b51-a359-621ccf282417')
ORDER BY memory_usage DESC
LIMIT 10 FORMAT Pretty;

returns all the child queries executed on the remote nodes (remote to the node where the query was first thrown at):

┏━━━━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━┳━━━━━━━━━┳━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━┓
┃ hostname()             ┃ type        ┃          event_time ┃ initial_query_id                     ┃ query_id                             ┃ memory     ┃ userCPU ┃ systemCPU ┃ normalized_query_hash ┃
┡━━━━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━╇━━━━━━━━━╇━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━━━┩
│ server-1 │ QueryFinish │ 2023-04-26 06:25:53 │ a7262fa2-bd8b-4b51-a359-621ccf282417 │ 7dfd9297-5173-4be7-a866-d7cbe1e1abab │ 93.77 MiB  │ 1890981 │    101724 │  17604798521132779336 │
├────────────────────────┼─────────────┼─────────────────────┼──────────────────────────────────────┼──────────────────────────────────────┼────────────┼─────────┼───────────┼───────────────────────┤
│ server-0 │ QueryFinish │ 2023-04-26 06:25:53 │ a7262fa2-bd8b-4b51-a359-621ccf282417 │ 1f810b3c-b3cb-4a7b-bc6c-8c8cc1e52515 │ 125.13 MiB │ 1754290 │    133344 │  17604798521132779336 │
├────────────────────────┼─────────────┼─────────────────────┼──────────────────────────────────────┼──────────────────────────────────────┼────────────┼─────────┼───────────┼───────────────────────┤
│ server-1 │ QueryStart  │ 2023-04-26 06:25:52 │ a7262fa2-bd8b-4b51-a359-621ccf282417 │ 7dfd9297-5173-4be7-a866-d7cbe1e1abab │ 0.00 B     │       0 │         0 │  17604798521132779336 │
├────────────────────────┼─────────────┼─────────────────────┼──────────────────────────────────────┼──────────────────────────────────────┼────────────┼─────────┼───────────┼───────────────────────┤
│ server-0 │ QueryStart  │ 2023-04-26 06:25:52 │ a7262fa2-bd8b-4b51-a359-621ccf282417 │ 1f810b3c-b3cb-4a7b-bc6c-8c8cc1e52515 │ 0.00 B     │       0 │         0 │  17604798521132779336 │
└────────────────────────┴─────────────┴─────────────────────┴──────────────────────────────────────┴──────────────────────────────────────┴────────────┴─────────┴───────────┴───────────────────────┘
└────────────────────────┴─────────────┴─────────────────────┴──────────────────────────────────────┴──────────────────────────────────────┴────────────┴─────────┴───────────┴───────────────────────┘

conversely, query_id = initial_query_id will return only the queries executed on the local node where the distributed query was first thrown at:

SELECT
    hostname(),
    type,
    event_time,
    initial_query_id,
    query_id,
    formatReadableSize(memory_usage) AS memory,
    ProfileEvents.Values[indexOf(ProfileEvents.Names, 'UserTimeMicroseconds')] AS userCPU,
    ProfileEvents.Values[indexOf(ProfileEvents.Names, 'SystemTimeMicroseconds')] AS systemCPU,
    normalizedQueryHash(query) AS normalized_query_hash
FROM clusterAllReplicas(default, system.query_log)
WHERE (query_id = initial_query_id) AND (initial_query_id = 'a7262fa2-bd8b-4b51-a359-621ccf282417')
ORDER BY memory_usage DESC
LIMIT 10 FORMAT Pretty;

giving:

┏━━━━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━┳━━━━━━━━━┳━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━┓
┃ hostname()             ┃ type        ┃          event_time ┃ initial_query_id                     ┃ query_id                             ┃ memory     ┃ userCPU ┃ systemCPU ┃ normalized_query_hash ┃
┡━━━━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━╇━━━━━━━━━╇━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━━━┩
│ server-2 │ QueryFinish │ 2023-04-26 06:25:53 │ a7262fa2-bd8b-4b51-a359-621ccf282417 │ a7262fa2-bd8b-4b51-a359-621ccf282417 │ 123.08 MiB │ 1849115 │    123412 │   4258439895846105173 │
├────────────────────────┼─────────────┼─────────────────────┼──────────────────────────────────────┼──────────────────────────────────────┼────────────┼─────────┼───────────┼───────────────────────┤
│ server-2 │ QueryStart  │ 2023-04-26 06:25:52 │ a7262fa2-bd8b-4b51-a359-621ccf282417 │ a7262fa2-bd8b-4b51-a359-621ccf282417 │ 0.00 B     │       0 │         0 │   4258439895846105173 │
└────────────────────────┴─────────────┴─────────────────────┴──────────────────────────────────────┴──────────────────────────────────────┴────────────┴─────────┴───────────┴───────────────────────┘

As for other System Tables, you can find more details about the meaning of each field in our docs.